Stealth Cam STC-IR1 User Manual page 17

Setting the Resolution
When you are in the Time & Date setting and see the Year
o
figure is blinking, immediately press SELECT this will bring you
into the Resolution setting.
When you enter the Resolution setting the small letter icon H
o
(high) or M (medium) or L (low)] will be blinking. (see memory
chart for resolution capacities)
Using the "UP or "DOWN" arrows enter the desired resolution.
o
Press SELECT
This will bring you to the next setting mode. TV System (Video
o
Signal)] or press MENU to return to the main screen.
Setting the TV System (NTSC / PAL)
NTSC is the correct setting for all of North America. Your Stealth Cam
STC-IR1 comes pre-programmed for NTSC.
After following above steps to enter the Resolution setting,
o
press SELECT
When you enter the TV System setting either the small icon N
o
www.stealthcam.net
STC-IR1
will bring you into the TV System setting.
Toll Free 877-269-8490
17