Stealth Cam STC-IR1 User Manual page 22

Note: In order to obtain proper weather resistance, please make
sure that both door latches are securely locked in place.
Testing the cameras coverage area
One of Stealth Cam's many features is the ability to test the coverage
area.
After mounting the camera; open front housing & slide the
o
power switch to ON
After the front LCD screen has powered ON, press the TEST
o
button. (This must be done with in 30 seconds or the camera
will enter detection mode).
Close the front housing.
o
Walk around in front of the camera to see if you have mounted
o
camera in the proper position. A green indicator light will blink
on the front housing when you have intruded the coverage area.
Adjust the camera position as needed & repeat testing until the
o
desired coverage area is achieved.
www.stealthcam.net
STC-IR1
Toll Free 877-269-8490
22