Tapping To Change The Tempo - Zoom MULTISTOMP MS-50G+ Operation Manual

Tapping to change the tempo.

The BPM, which is used for the tempo synchronization of delay time, for example, can be set separately for
each patch memory.
1.
Use and
the tempo (→
Switching patch
2.
Press to open the
module, and press
The BPM module is in the SFX category (yellow) at the left edge of the
This adds the BPM module to the patch memory.
NOTE
• The BPM module cannot be added if the patch memory already has 6 effects. In this case, delete an effect
from the patch memory first. (→
• Each patch memory can only have one BPM module.
3.
Press .
The tempo can be set by tapping
The indicator blinks at the set tempo interval.
on the Home Screen
memories).
LIBRARY Screen. Then, use
(→
Adding effects).
Deleting effects)
repeatedly. (Tap tempo)
to select the patch memory for which you want to change
,
30
, and to select the BPM
LIBRARY Screen.