Zoom MULTISTOMP MS-50G+ Operation Manual page 25

4.
Turn to select whether to add on the left or the right, and press
This opens the LIBRARY Screen
To cancel adding an effect, turn
.
NOTE
If is pressed when 6 effects have already been added to the patch memory, the following message will
appear and adding the effect will fail. In this case, delete an effect from the patch memory first. (→
effects)
that shows all the effects. Select the effect to add. (→
on the ADD EFFECT Screen and select "CANCEL". Then, press
25
.
Switching
Deleting
effects)