Menu; Menu Tree - JBL SA550 Classic Owner's Manual

Menu

Press the MENU button on the amplifier or the
Use the Input and Volume controls to navigate the menu, or use the navigation buttons on the remote
control.

Menu Tree

Display
Balance
Phones Ovr
Timeout
BT Auto Sw
BT Volume
PM Input
PM Volume
Filter
PLL (input)
System Code
Version
System Update
System Reset
BT Reset
RS232 Stdby
Pg 13 JBL SA550 Classic Owner's Manual EN
Select Display Brightness. Default is Full.
Set left / right output balance.
Control whether the speaker outputs and pre-outs are muted when a pair of headphones are connected.
The default is Off (speakers muted). On = speakers unmuted.
Auto standby duration. Select Off to disable. Default is 20m.
Automatically select BT input when BT device starts playing. Default is On.
Set maximum volume for BT Input. Default is 40.
Select input for fixed volume. Default is None.
Set volume for fixed volume input. Default is 40.
Select a digital input filter from the options. Default is Apodizing.
Adjusts sensitivity to a digital source device's clock. Normal is suitable for most sources. Select WIDE if noises or
audio interruptions occur (most likely from high jitter sources such as a TV or set-top box). Default is Normal.
Change the IR code set if the amplifier remote commands conflict with another device in your home. Changing this
setting does not affect the remote handset. Default is 16.
Displays the software version of the amplifier.
Initiates a software update from the USB connector.
Restores factory settings.
Restores factory settings to Bluetooth only – this will delete all stored pairing.
Enables RS232 operation when the amplifier is in standby. Default is Off.
on the remote control.