Table of Contents
Advertisement
Headphones
The headphone socket (PHONES) accepts headphones fitted with a 3.5mm stereo jack. By default, the pre-
amp outputs and speakers are muted when the headphones are plugged in.
Note: the speakers and pre-amp outputs can be configured to remain active when
headphones are connected using the Headphone Override function in the setup menu.
To use the menu, see Page 13.
Balance Control
The balance of sound between the left and right speakers can be adjusted using the balance control in the
menu. To use the menu, see Page 13.
Processor Mode
Processor mode will fix the volume for one input. It can be assigned to any analog input (excluding Phono).
This allows the amplifier to be used in conjunction with a home cinema receiver in a combined home
cinema and two channel system.
The input and volume level can be set in the menu. To use the menu, see Page 13.
Pg 12
JBL SA550 Classic Owner's Manual EN
Advertisement
Table of Contents
