Table of Contents
Advertisement
Setting the clock
You can only change the clock when no other clock function is
active.
Press the
KJ
clock function button repeatedly until
1.
the
KJ
and
3
symbols light up.
Set the clock using the rotary selector.
2.
The setting is applied automatically.
Rapid heat up
You can reduce the preheat time for the
and
Bread-baking operating modes if the set temperature is
ë
higher than 100 °C.
Note: During Rapid heat up, do not place any food in the
cooking compartment for as long as the
Set the operating mode and temperature for the bottom oven.
1.
The bottom oven starts heating.
Childproof lock
In this section, you can read about
how to lock your appliance
■
how to lock your appliance permanently
■
The childproof locks for both ovens can be activated using the
operating controls on the
Lock
Once it has been locked, the appliance cannot be switched on
accidentally or by unauthorised users (e.g. by children playing).
To switch the appliance on again, you must unlock it. After
appliance operation, the appliance is not automatically locked.
Lock it again if necessary or activate the permanent lock.
Lock appliance
Switch off the appliance.
1.
Press and hold the
info button for 3 seconds to go to the
±
2.
basic settings menu.
Press the
±
info button briefly and repeatedly until
3.
appears in the temperature display.
Turn the temperature selector until
4.
temperature display.
Press and hold the
info button until the
±
5.
in the temperature display.
Note: If you try to switch on the locked appliance, -
on the temperature display and "controls locked" appears on
the text display.
CircoTherm®
3
symbol is lit.
f
õ
bottom oven.
™‚‚
appears on the
symbol appears
‚
†
Press the
2.
symbols light up and
Turn the rotary selector clockwise.
3.
In the clock display,
up. Rapid heat up is activated for the bottom oven.
After reaching the set temperature, Rapid heat up switches off.
The
symbol goes out.
f
Checking, correcting or deleting settings
To check your settings, press the
1.
repeatedly until the corresponding symbol lights up.
If necessary, you can correct your setting using the rotary
2.
selector.
If you wish to cancel your setting, turn the rotary selector anti-
3.
clockwise to the original value.
Unlocking the appliance
Press and hold the
1.
temperature display.
Turn the temperature selector until
2.
temperature display.
Press and hold the
3.
out.
Permanent lock
Once it has been permanently locked, the appliance cannot be
switched on accidentally or by unauthorised users (e.g. by
children playing).
To switch the appliance on, you must interrupt the permanent
lock briefly. After you have switched your appliance off, it locks
again automatically.
Locking the appliance permanently
Switch off the appliance.
1.
™‚‹
Press and hold the
2.
basic settings menu.
Press the
3.
appears in the temperature display.
Turn the temperature selector until
4.
temperature display.
- appears
Press and hold the
5.
Your appliance will be locked after 30 seconds. The
symbol appears in the temperature display
Note: If you try to switch on the locked appliance, -
on the temperature display and "Appliance permanent lock"
appears on the text display.
clock function button until the
KJ
appears in the clock display.
Œ
Ž
is displayed and the
KJ
info button until
±
™‚‹
±
info button until the
±
info button for 3 seconds to go to the
info button briefly and repeatedly until
±
™ƒ‚
info button for 3 seconds.
±
and
KJ
f
f
symbol lights
clock function button
appears in the
™‚‚
appears on the
‚
symbol goes
™‚‹
appears on the
‚
appears
†˜
13
Advertisement
Table of Contents
