Motorola APX 2500 User Manual page 124

68012006035-EM
Glossary
Control Channel
In a trunking system, one of the channels that is used to provide a continuous, two-way/data-
communications path between the central controller and all radios on the system.
Conventional
Typically refers to radio-to-radio communications, sometimes through a repeater. Frequencies are
shared with other users without the aid of a central controller to assign communications channels.
Conventional Scan List
A scan list that includes only conventional channels.
Cursor
A visual tracking marker (a blinking line) that indicates a location on a display.
Deadlock
Displayed by the radio after three failed attempts to unlock the radio.The radio must be powered off
and on prior to another attempt.
Digital Private Line (DPL)
A type of digital communications that utilizes privacy call, as well as memory channel and busy channel
lock out to enhance communication efficiency.
Digital Signal
An RF signal that has a pulsed, or discrete, nature, rather than a continuous nature.
Dispatcher
An individual who has radio-system management duties and responsibilities.
Digital Signal Processor
A microcontroller specifically designed for performing the mathematics involved in manipulating analog
information, such as sound, that has been converted into a digital form. DSP also implies the use of a
data compression technique.
Dynamic Regrouping
A feature that allows the dispatcher to temporarily reassign selected radios to a single special channel
so they can communicate with each other.
DVRS
Digital Vehicular Repeater System.
ESN
Electrical Serial Number.
Failsoft
A backup system that allows communication in a non-trunked, conventional mode if the trunked system
fails.
FCC
124