APRILIA TUAREG 660 Instruction Manual page 111

SET THE SPRING PRE-LOAD AND THE HYDRAULIC DAMPING OF THE SHOCK
ABSORBER ACCORDING TO THE VEHICLE USE CONDITIONS.
IF THE SPRING PRE-LOAD IS INCREASED, IT IS NECESSARY TO INCREASE
THE DAMPING OF THE SHOCK ABSORBER ACCORDINGLY TO AVOID SUD-
DEN JERKS WHEN RIDING.
IF NECESSARY, CONTACT AN OFFICIAL APRILIA DEALER. TRY RIDING THE
VEHICLE ON THE STREET UNTIL THE OPTIMUM ADJUSTMENT IS OBTAINED.
Operating on the left side of the vehicle, it is possible to access the spring pre-load
adjustment knob:
•
Turning clockwise the pre-load increases, vice versa by turning anti-clock-
wise it decreases.
03_08
Operating on the right side of the vehicle, in correspondence with the rear brake fluid
reservoir, it is possible to access the hydraulic compression damping adjuster (2):
•
Turning clockwise the hydraulic compression damping increases, vice versa
by turning anti-clockwise it decreases.
03_09
111