Gravely ZT Sport Owner's/Operator's Manual page 10

MOVING UNIT MANUALLY
WARNING: DO NOT disengage or
bypass transmission and coast
downhill.
NOTE: See item 6 in figure 3
on page 8 for transmission
bypass lever location.
Disengage transmission
bypass lever to drive unit and
engage transmission bypass
lever to push unit manually
(figure 4).
OE0060
Transmission
Bypass Lever
Disengaged
Transmission
Bypass Lever
Engaged
Figure 4
SEAT ADJUSTMENT
1. Remove detent pin from unit (figure 5).
2. Tip seat forward.
3. Loosen mounting hardware and slide seat
forward or backward to desired position.
Tighten mounting hardware.
4. Put seat down and install detent pin.
Seat
TRANSPORTING UNIT
ALWAYS turn engine off when transporting on
truck or trailer. Tie unit down securely. Do not
tie down by linkages, guards, cables or other
parts that may be damaged.
OE0044
GB - 10
Mounting Hardware
Detent Pin
Figure 5
OE0043