Pm Mode] S; Ism Method] J; Network Settings] S - LG 75XF3C-B.AUS Owner's Manual

56
55. [PM Mode] (Command: s n, 0c)
Selects the desired PM mode option.
Transmission
(s)(n)( )(Set ID)( )(0c)( )(Data)(Cr)
Data 00: Sets the Power Off mode.
01: Sets the Sustain Aspect Ratio mode.
02: Sets the Screen Off mode.
03: Sets the Screen Off Always mode.
04: Sets the Screen Off & Backlight mode (Outdoor mode)
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(0c)(Data)(x)
* It may not be supported depending on the model.
56. [ISM Method] (Command: j p)
Selects the ISM Method option.
Transmission
(j)(p)( )(Set ID)( )(Data)(Cr)
Data 01: Inversion
02: Orbiter
04: White Wash
08: Normal
20: Color Wash
80: Washing Bar
90: User Image
91: User Video
* The jp command works when Timer is set to Immediately.
Acknowledgement
(p)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
57. [Network Settings] (Command: s n, 80 or 81 or 82)
Configures network and DNS settings.
Transmission
(s)(n)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)( )(Data4)( )
(Data5)(Cr)
Data1 80: Configures/views the temporary IP mode (Auto/
Manual), subnet mask, and gateway.
81: Configures/views the temporary DNS address.
82: Saves temporary settings and views information about
the current network.
* If Data1 is 80,
Data2 00: Auto
01: Manual
FF: Views the temporary IP mode (Auto/Manual), subnet
mask, and gateway.
** If Data2 is 01 (Manual),
Data3: Manual IP address
Data4: Subnet mask address
Data5: Gateway address
* If Data1 is 81,
Data2: DNS address
FF: Views the temporary DNS address.
* If Data1 is 82,
Data2 80: Applies the temporarily saved IP mode (Auto/Manual),
subnet mask, and gateway.
81: Applies the temporary DNS address
FF: Information on the current network (IP, subnet
gateway, DNS)
*** Examples of settings
1. Auto: sn 01 80 00
2. Manual: sn 01 80 01 010177223241 255255254000
010177222001 (IP: 10.177.223.241, subnet:
255.255.254.0, gateway: 10.177.222.1)
3. Network read: sn 01 80 ff
4. DNS setting: sn 01 81 156147035018 (DNS: 156.147.35.18)
5. Applying the settings: sn 01 82 80 (applies the saved IP mode
(auto/manual), subnet mask, and gateway)
sn 01 82 81 (applies the saved DSN)
* Each IP address contains 12 decimal digits.
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(Data1)(Data)(x)
* It may not be supported depending on the model.
* This feature is available only for wired networks.