Table of Contents
Advertisement
USB Cloning
You can copy the product settings to other sets.
Send to USB
•
You can save the current settings in file format to a USB device.
•
Select the file name and press the OK button to complete
•
Items not saved: Current Time, Power On Delay, Set ID, items under Network, White Balance, Tile ID, current input
signal (Input), Signage setup menu - master/slave mode, time sync, all menus in the ISM method menu (except for
mode, repeat, wait, and duration), Photo & Video and Music app menus such as picture or sound
Receive from USB
•
You can import configuration files from a USB device and change the settings for the current set.
•
Using a settings file from a different model may not work properly on this product.
•
When import is complete, the power reboots after 5 seconds.
Logo Image Download
•
You can download and apply the boot images.
•
The image you want to apply must be stored in the LG_MONITOR folder at the top level of a USB device.
•
When downloading is complete, the set reboots and the boot image will be applied.
CAUTION
•
To use the Configuration Cloning function, be sure to use a USB storage device formatted using the FAT32 file
system. If the USB storage device has been formatted with another file system, it may not work correctly.
Password Change
You can change your password in the Installation menu.
You can change your password for security purposes. Enter a new 4-digit password. Enter the same password again in
Confirm Password for confirmation.
21
Advertisement
Chapters
Table of Contents
