20
INSTALLING THE IR UNIT, BRIGHTNESS SENSOR, LED, AND Expansion PCB
(Only for 75XF3C model)
Expansion PCB
IR Unit
•
If you use pemnut arbitrarily, the product may be damaged.
•
Remove the label only when using the side mount. Do not remove
the label when not using the side mount.
Enclosure
(Only for 75XF3C model)
Cable
IR Unit
Pemnut
•
Open the cable holder and pull out the cables.
•
Loosen the screws and remove the IR unit.
•
Install the IR unit in the enclosure in a distance where the cable can be
reached.
Unit : mm (inches)
9.4
17.8 (0.7)
(0.3)
13.9 (0.5)
0.3
Φ7.3
(0.01)
(0.2)
Φ7.3
(0.2)
<IR Unit>
•
Remove the cable from the sensor.
•
Mount the Expansion PCB after
removing the sensor.
Hole2-Φ4
(0.15)