Table of Contents
Advertisement
16 - HYDRAULIC CONTROLS
Authorization for using the hydraulic controls is given by the validation of the driver's presence (see: 2 - DESCRIPTION:
6 - MAN-MACHINE INTERFACE (MMI)) and if the conditions of use for the hydraulic control are followed.
Do not attempt to alter the hydraulic system pressure. In the event of malfunction, contact your dealer.
ANY ALTERATION MAY RENDER THE WARRANTY NULL AND VOID.
Operate the hydraulic controls gently and smoothly to avoid accidents caused by jerking of the lift truck.
• A - Lifting and tilting control lever.
• B - Telescoping control button.
• C - Left stabiliser control lever.
• D - Right stabiliser control lever.
• E - Levelling corrector control lever.
• F - Attachment control button.
LIFTING THE LOAD
- The lever A backwards when lifting.
- The lever A forwards when lowering.
TILT OF CARRIAGE
- The lever A to the left for reverse tilt.
- The lever A to the right for forward tilt.
TELESCOPING
- Button B forwards for extending.
- Button B backwards for retracting.
NOTE: When completely retracting the telescopes,
insistently operate the control so as to allow all
the telescopes to retract fully.
MT 1840 ...
NOTE:
Complete extension of the telescopes can
only be carried out if the stabilisers are
lowered and exercising pressure on the
ground.
L.H. STABILISER
- Move lever C forwards to lower.
- Move lever C backwards to lift.
R.H. STABILISER
- Move lever D forwards for lowering.
- Move lever D backwards for lifting.
NOTE: The stabilisers can only be raised if the telescopes are retracted and the lifting angle of the boom is less than 62°.
LEVELING CORRECTOR (OPTION)
- Move lever E to the left to tilt the lift truck to the left.
- Move lever E to the right to tilt the lift truck to the right.
NOTE: The tilt correction may only be performed if the lifting angle for the boom is less than 30°.
ATTACHMENT (OPTION)
- Button F forwards or backwards.
IMPORTANT
2 - 51
*
*
*
OPTION
B
F
A
D
C
E
*
N°52515648
Advertisement
Chapters
Table of Contents
