• ANSWER A CALL
•
To answer an incoming call, press
•
To end the call, press
If you do not want to answer a call, press
to voice mail.
Note: If you have activated the
forward calls, for example, to your voice mailbox, rejecting an
incoming call will also forward the call. See "Settings for call
forwarding" on p. 24.
When a call comes in, press
tone. If you then want the call to be directed to voice mail, press
again for Decline.
Tip: To adjust the ringing tones for different environments and events,
for example, when you want your phone to be silent, see "Profiles"
on p. 104.
Note: It is possible that the phone assigns a wrong name for the phone
number. This happens if the phone number of the caller is not stored
in Contacts but the seven last digits of the number match another
number that is stored in Contacts. In this case, call identification
is not correct.
Call waiting (system service)
If you have activated the Call waiting service,
the system will notify you of a new incoming
call while you have a call in progress. See "Call
waiting (system service)" on p. 34.
1
During a call, press
waiting call. The first call is put on hold.
To switch between the two calls,
press Swap.
2
To end the active call, press
Tip: To end both calls at the same time, select Options→
press OK.
.
.
. The caller will be directed
Call
forward→
Silence
to quickly mute the ringing
to answer the
.
[ 23 ]
Your phone
If busy
function to
End all calls
and