Samsung WD11T Series User Manual page 62

Table of Contents

Advertisement

Available languages

Available languages

Troubleshooting
Problem
Leaks water.
Has odours.
No bubbles are seen
(Bubble models only).
Can I open the
AddWash door at any
time?
A message appears on
the display to alert that
dispenser is open.
If a problem persists, contact a service center. The number of the service center is on the label attached to
the product.
62
English
U-PJT_COMBO-MD_SimpleUX_DC68-04199Y-00_EN.indd 62
• Make sure the door is properly closed.
• Make sure all hose connections are tight.
• Make sure the end of the drain hose is correctly inserted and secured to
the drain system.
• Avoid overloading.
• Use high efficiency (HE) detergent to prevent oversudsing.
• Check the drain hose.
-
Make sure the end of the drain hose is not placed on the floor.
-
Make sure the drain hose is not clogged.
• Excessive suds collect in recesses and can cause foul odours.
• Run cleansing cycles to sanitise periodically.
• Clean the door seal (diaphragm).
• Dry the washing machine interior after a cycle has finished.
• You may not be able to see bubbles if there is too much items in the drum.
• Severely contaminated laundry may not generate bubbles.
• The AddWash door can be opened only when the
However, it does not open in the following cases:
-
When the boiling or drying process is running and the internal
temperature becomes high
-
If you set the Child Lock for safety reasons
-
When the drum wash or drum drying cycle that does not involve
additional laundry is running.
• Check if the detergent drawer is closed properly.
-
Open the detergent drawer and close it again. Make sure it's closed
properly.
Action
indicator appears.
2021/2/2 12:51:28

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd1 t series

Table of Contents