Advertisement
English
Our products are designed to meet the
highest standards of quality, functionality
and design. We hope you enjoy your new
Braun Shaver.
Read these instructions completely, it
contains safety information. Keep it for
future reference.
Warning
Your shaver is provided with a special
cord set, which has an integrated Safety
Extra Low Voltage power supply. Do not
exchange or tamper with any part of it,
otherwise there is risk of electric shock.
Only use the special cord set provided
with the appliance.
Do not shave with a damaged foil or cord.
This appliance is suitable for
cleaning under running water
and use in a bath or shower.
For safety reasons it can only be operated
cordlessly.
This appliance is not intended for use by
children or persons with reduced physical,
sensory or mental capabilities, unless
they are given supervision by a person
responsible for their safety. In general, we
recommend that you keep the appliance
out of reach of children. Children should
be supervised to ensure that they do not
play with the appliance.
Description
1 Shaver foil
2 Cutter block
3 Foil release buttons
4 Long hair trimmer
5 Comfort setting switch sensitive
6 On/off switch
7 Charging light
8 Low-charge light
9 Replacement light for shaving parts
10 Shaver power socket
11 Special cord set
12 Travel pouch
Charging
Recommended ambient temperature for
charging is 5 °C to 35 °C. The battery
may not charge properly or at all under
extreme low or high temperatures.
Recommended ambient temperature for
shaving is 15 °C to 35 °C. Do not expose
the shaver to temperatures higher than
50 °C for extended periods of time.
• Using the special cord set (11), connect
the shaver to an electrical outlet with the
motor switched off and charge it for at
least one hour.
• A full charge provides up to 45 minutes
of cordless shaving time. This may vary
according to your beard growth.
Charging lights
During charging or when using the shaver,
the charging light (7) will blink green.
When fully charged, it will light up
continuously, provided the shaver is
switched on or connected to an electrical
outlet.
The red low-charge light (8) flashes when
the battery is running low. You should be
able to finish your shave.
Shaving
Press the on/off switch (6) to operate the
shaver.
Comfort setting switch sensitive
Setting the shaver head according to your
comfort needs.
The sensitive switch (5) provides three
options for comfort setting:
1 ß
+ :
The shaver head is in full swing, freely
follows the contours of your skin to
provide more comfort.
2
middle position:
The shaver head is semi-fixed for
more control.
19
Advertisement
