Advertisement
Available languages
Available languages
INSTALLATION (ACCESSORIES NOT INCLUDED):
1. FLANGE
•
Manufacture the mould with the iron cable or bar according to its
design.
• Use the flanges to secure the luminous thread inside the cable.
• It is perfect for Artwork and lighting of buildings.
2. STEEL MESH
• Firstly make the design in its current size on paper.
• Place the steel mesh over the design, fix the luminous thread on the mesh
with flanges according to its drawing.
• It is perfect for Artwork.
3. FIXING CLIP
•
Set the fixing clip with ropes in wooden surfaces, with glue or double-
face adhesive tape, according to its design.
•
To make square or rectangular figures, use the appropriate fixing clip
and set it with ropes.
• You can use it on wood surfaces, metal, etc It is perfect for great lighting
proyects.
4. CABLE CONDUIT
• Set the cable conduit on a glass surface with the double-face cap or tie
it on wood surfaces.
• Push the luminous thread in the conduit.
• It is perfect for right-line decoration.
5. SUCTION PADS
• Fix the suction pads on the glass surface or metal with glue.
• Use the flanges to fix the luminous thread to the suction pad.
• It is suitable to glass or metal surfaces.
1
2
3
4
5
Advertisement
