Dust Collection; Check Gearbox Oil; Test Run - Grizzly G0453 Owner's Manual

Dust collection

DO NOt operate the Model G0453/G0454
without an adequate dust collection system.
this planer creates substantial amounts of
wood dust while operating. failure to use a
dust collection system can result in short
and long-term respiratory illness.
Recommended cfM at Dust Port
• g0453 ..........................................400 CFM
• g0454 ..........................................625 CFM
Do not confuse this CFM recommendation with
the rating of the dust collector. To determine the
CFM at the dust port, you must consider these
variables: (1) CFM rating of the dust collector,
(2) hose type and length between the dust col-
lector and the machine, (3) number of branches
or wyes, and (4) amount of other open lines
throughout the system. Explaining how to cal-
culate these variables is beyond the scope of
this manual. Consult an expert or purchase a
good dust collection "how-to" book.

check Gearbox Oil

it is critical that you make sure there is oil in the
gearbox before proceeding with the test run. refer
to the Lubrication instructions for the gearbox on
Page 32 for more details on which type of oil to
use, how much to use, and where to put it.
GEARBOXES MUST
BE FILLED WITH OIL!
NO OIL SHIPPED WITH
MACHINE!
Requires 80W–90W
or Equivalent
Gear Oil.
g0453/g0454 (Mfg. since 3/08)
once the assembly is complete, test run your
machine to make sure it runs properly and is
ready for regular operation. the test run consists
of verifying the following: 1) the motor powers up
and runs correctly and 2) the stop button safety
feature works correctly.
if, during the test run, you cannot easily locate
the source of an unusual noise or vibration, stop
using the machine immediately, then review
troubleshooting on Page 33.
if you cannot find a remedy, contact our tech
support at (570) 546-9663 for assistance.
Before starting the planer, make sure you
have performed the preceding assembly
and adjustment instructions, and you have
read through the rest of the manual and
are familiar with the various functions and
safety features on this machine. failure to
follow this warning could result in serious
personal injury or even death!
to test run the machine:
1.
2.
3.
Get other manuals https://www.bkmanuals.com

test Run

Make sure you understand the safety instruc-
tions at the beginning of the manual and that
the machine is set up properly.
Make sure all tools and objects used during
set up are cleared away from the machine.
Make sure the gearbox has the correct
amount of oil (refer to Gearbox Oil on Page
32 for detailed instructions).
-21-