ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THIS GUIDE. Visit the product page at ARCAM.co.uk and download the Safety Sheet for a full list of safety instructions. Class II Product This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth (“ground”...
Table of Contents IMPORTANT SAFETY INSTRUCTIONS ............................2 Thank you for choosing ARCAM ..............................4 Placing The Unit ..................................4 Package Contents ..................................4 Front Panel ....................................5 Rear Panel ....................................5 Remote Control ..................................6 Display Control ....................................6 Input Selection ....................................
Thank you for choosing ARCAM The "A" in ARCAM stands for Amplification - this is our core competence. The A5, A15 and A25 are the latest in more than 45 years of amplifier design and manufacture, going back to our first product in 1976 - the A&R Cambridge A60 amplifier.
Rear Panel A5 & A15 Analog Pre-amp CONTROL INPUT Audio Inputs Outputs Speaker Power Input For use with ARCAM Radia Outputs series source components Digital Audio Phono only Inputs (MM) Input Phono Ground This terminal must not be used as a safety earth.
Display Control Press the button on the remote control to turn the display on or off. Input Selection Using the left and right cursor buttons on the remote control. ARCAM A5_A15_A25 OM EN...
If you are unsure as to how your system should be connected, please contact your ARCAM dealer who will be happy to help you. ARCAM A5_A15_A25 OM EN...
When you see SPEAKERS, press the down cursor button on the remote control to see options. Paired Headphones will be listed, or select Pair BT Output (A5/A15) or Pair New Bluetooth Device (A25). Your headphone must be in pairing mode to be discovered and paired.
Press the MENU button on the amplifier or the on the remote control. Use the the navigation buttons on the remote control. Menu Tree Select the input that an ARCAM Radia streamer is connected to. Streamer Input Default is NONE. Halo Brightness Select the brightness of the dial illuminations.
Try disconnecting the input cable and plug it fully in again (turn the power off before doing this). Hum on the analogue input If the Hum stops when the source is disconnected, the problem is most likely to be in the cable or the source device to which it is connected. ARCAM A5_A15_A25 OM EN...
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners. ARCAM A5_A15_A25 OM EN...