Important Maintenance; Service Assistance - Husky C400H-WE-UK-HS User Manual

IMPORTANT – MAINTENANCE
The condenser and the compressor compartment MUST be cleaned quarterly in
order to ensure appropriate temperature control and maintain energy efficiency.
Use a vacuum cleaner fitted with a soft brush attachment to remove dust
carefully from the condenser, the components and grilles.
The external and internal surfaces of the appliance should be cleaned regularly.
Switch the appliance off and disconnect the plug from the mains socket. Clean
the external and internal surfaces of the appliance with a mild soap solution, then
wipe dry. Do NOT use cleansers containing chlorine or other harsh cleansing
agents, as these can damage the stainless steel surfaces and components. Use
mild soapy water to clean the gasket and seals.

SERVICE ASSISTANCE

The cooling system is a hermetically sealed circuit and does not require any maintenance other
than regular cleaning (see 'Maintenance').
If the appliance fails to work, first check the troubleshooting guide on page 5. If you cannot locate
the reason for the failure, please contact your supplier, stating the model and serial number of the
cabinet. You may find this information on the rating plate, which is affixed on the back wall or
inside the appliance.
Technical Support: 01455 555340 (UK)
9