Table of Contents
Advertisement
Technical Support: 01455 555340 (UK)
• Make sure there is a suitable power outlet with proper grounding to power the appliance.
• For safety, the appliance must be properly earthed in accordance with specifications.
• Always remember to unplug the appliance before cleaning. Never unplug this appliance
by pulling on the power cable. Always grip plug firmly and pull straight out from the
socket.
• All electrical repairs must be carried out by a qualified engineer. Inadequate repairs may
be dangerous.
• Do not damage any parts of the appliance which carry refrigerant by piercing, perforating,
crushing, twisting or scraping. If refrigerant comes into contact with the eyes it may cause
serious eye injury.
• Do not obstruct or cover the ventilation grille.
• Do not allow children to play with the appliance, or to sit on it or hang onto the door.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabil ities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the unit by a person
responsible for their safety.
HOW TO MINIMISE THE ENERGY CONSUMPTION OF YOUR
APPLIANCE
• Energy consumption will be lower if the appliance stands in a well ventilated space and in
particular if the vents on the appliance are clear of obstruction.
• Do not place the appliance in direct sunlight or near a heat source such as ovens,
radiators, heaters, etc as this will increase energy consumption.
• Keep the appliance door closed as much as possible.
• Setting the thermostat colder means higher energy consumption, so set only as cold as
you really require.
• Do not overfill the appliance - overfilling means the cool air cannot circulate freely inside
the appliance which may slow the process of chilling/freezing the contents and make the
appliance less efficient.
• Defrost the appliance if frost can be seen building up inside - frost will increase energy
consumption and make the chilling/freezing process slower (see section 'Defrosting').
• Turn the appliance off completely if it is not required for a period of days (or longer) to
avoid wasting energy.
BEFORE USING FOR THE FIRST TIME
IMPORTANT: Before switching the appliance on, we recommend you allow it to
stand upright for 8 hours. Failure to do this may result in damage to the appliance.
• To ensure correct operation, it is important that the appliance is level. Use a spirit level
to check.
• Before operation, we recommend that the appliance is cleaned for reasons of hygiene
and to remove any residue left from manufacture.
• For good circulation, vents must not be blocked. Keep a minimum of 100mm of clear
space around the appliance. Your Husky appliance should be placed on flat and firm
surface for quieter operation.
• Do not expose the appliance to direct sunlight or a heat source such as ovens, radiators,
heaters, etc.
• Do not under any circumstances place heated food or beverages in your Husky appliance.
• Do not open the door more often than necessary to lessen the escape of cold air.
• For better air circulation, do not overfill the appliance.
• Adjust the thermostat according to the amount of product and the ambient temperature.
4
Advertisement
Table of Contents
