Welcome to your new Husky Thank you for buying this Husky appliance. It has been designed and manufactured for many years of trouble-free service. Operation is very simple, but please take a few minutes to read this user manual. It contains important safety information, and tips to ensure you receive the best possible performance from your Husky appliance.
SAFETY INSTRUCTIONS & WARNINGS Before switching on your Husky appliance, read the information in this user manual carefully. The user manual contains important observa tions relating to the assembly, operation and maintenance of the appliance.
• Do not expose the appliance to direct sunlight or a heat source such as ovens, radiators, heaters, etc. • Do not under any circumstances place heated food or beverages in your Husky appliance. • Do not open the door more often than necessary to lessen the escape of cold air.
The appliance is not plugged in. Connect the plug to the work properly. power supply The plug and/or the power cable are Call Husky (see back page) or faulty. a qualified engineer. Replace the fuse with one of The fuse has blown.
Technical Support: 01455 555340 (UK) C400H-WE-UK-HS Operating Instructions OPERATION Place the shelves firmly on their supports. The maximum load for a shelf is 35kg. Check that the appliance is functioning properly before installing and filling it. The thermostat is located inside the appliance.
Technical Support: 01455 555340 (UK) IMPORTANT – MAINTENANCE The condenser and the compressor compartment MUST be cleaned quarterly in order to ensure appropriate temperature control and maintain energy efficiency. Use a vacuum cleaner fitted with a soft brush attachment to remove dust carefully from the condenser, the components and grilles.
25 years experience in quality refrigeration for convenience and hospitality professionals, and we have a great range of chillers for the home too. You’ll find Husky products all over the world, so whatever your requirements we’ r e sure to have a good looking energy-efficient model that’...