NETGEAR R7000 User Manual page 77


To add a port triggering service:
On the Port Triggering screen, click Add Service.
1.
In the Service Name field, type a descriptive service name.
2.
In the Service User list, select Any, or select Single address and enter the IP address of
3.
one computer.
Any (the default), allows any computer on the Internet to use this service.
•
Single address restricts the service to a particular computer.
•
Select the service type, either TCP or UDP or both (TCP/UDP). If you are not sure, select
4.
TCP/UDP.
In the Triggering Port field, enter the number of the outbound traffic port that will open the
5.
inbound ports.
Enter the inbound connection port information in the Connection Type, Starting Port, and
6.
Ending Port fields.
Click Apply.
7.
The service is now in the Portmap table.
Enable port triggering.
8.
The router uses the service that you added.
R7000 Smart WiFi Router
Security
77