Table of Contents
Advertisement
If you are not sure, select Auto Detect so that the router detects the IPv6 type that is
•
in use.
If your Internet connection does not use PPPoE, DHCP, or fixed, but is IPv6, select
•
Auto Config.
For more information about Internet connection types, see the following sections.
Click the Apply button.
3.
Your changes take effect.
Requirements for Entering IPv6 Addresses
IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by
colons. Any four-digit group of zeroes within an IPv6 address can be reduced to a single zero
or altogether omitted.
The following errors invalidate an IPv6 address:
More than eight groups of hexadecimal quartets
•
More than four hexadecimal characters in a quartet
•
More than two colons in a row
•
Auto Detect
To set up an IPv6 Internet connection through auto detection:
Select Advanced > Advanced Setup > IPv6.
1.
The IPv6 screen displays.
In the Internet Connection Type list, select Auto Detect.
2.
The screen adjusts:
The router automatically detects the information in the following fields:
Connection Type. This field indicates the connection type that is detected.
•
R7000 Smart WiFi Router
Advanced Settings
107
Advertisement
Table of Contents
