LG LSDS6338F.BRSLSTD Owner's Manual page 81

Problem
Surface is not level Range not leveled
Oven is tipping
• Check with installer first.
• Use carpenter's level
Anti-tip device not installed correctly
a
b
c
d
e
• Check with installer first.
Flames too big on The installer missed part of the conversion. (Check 2 parts: regulator, cooktop
converted cooktop valve).
(NP ~ LP)
a
b
• Check with installer first.
• Refer to installation manual.
Flame is too small 1. Variable gas pressure
or too large 2. Installer did not check
• Check with installer first.
Possible Cause & Prevention
to check level.
a
Approximately 0.65" (16.5 mm)
Level both sides of range
Screw must enter wood or concrete
Anti-tip bracket
Wall plate
Regulator
Cooktop valve
LIMITED WARRANTY 81