Elo Touch Solutions ET1598L User Manual page 6

Connector Panel & Interfaces
Touchscreen Display Connections
1. Connect the HDMI/DP/VGA video cables between the monitor's HDMI/DP/VGA input connectors and
your HDMI/DP/VGA video source. Tighten the video cable's screws for best performance on VGA
connector.
2. Connect the USB touch cable between the monitor's USB connector and your PC's USB port or Connect the Serial touch cable between the monitor's COM
(Serial) connector and your PC's COM (Serial) port.
3. Connect a 12VDC power supply to the monitor's input power jack.
touchscreen display
4. The ships in an ON state, video should be displayed on your monitor already.
Installing Power D/C 24V to D/C 12V convertor (Optional kits)
User Manual: ET1598L
UM60119 Rev C, page 5 of 25