3. Install the
base
cover.
4. Follow the procedure in
Removing the speakers (tweeters)
Prerequisites
1. Follow the procedure in
NOTE:
Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the
base
cover.
About this task
The following image(s) indicate the location of the speakers (tweeters) and provides a visual representation of the installation
procedure.
Steps
1. Disconnect the speaker (tweeters) cable from the system board.
2. Lift the speakers (tweeters) and their cables off the palm-rest and keyboard assembly.
Installing the speakers (tweeters)
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the speakers (tweeters) and provides a visual representation of the installation
procedure.
48
Removing and installing components
After working inside your
Before working inside your
computer.
computer.
Before working inside your