Speakers; Removing The Speakers (Woofers) - Dell P117F003 Service Manual

6. Close the latch and replace the clear adhesive tape.
7. Connect the optional fingerprint-reader cable to the I/O board and close the latch to secure the cable.
8. Align the screw holes on the RJ45 network-port assembly with the screw holes of the I/O board.
9. Replace the two screws (M2x5) that secure the RJ45 network-port assembly to the I/O board.
Next steps
1. Install the heat sink
2. Install the left fan
3. Install the base cover.
4. Follow the procedure in

Speakers

Removing the speakers (woofers)

Prerequisites
1. Follow the procedure in
NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the wireless card.
About this task
The following image(s) indicate the location of the speakers (woofers) and provides a visual representation of the installation
procedure.
After working inside your
Before working inside your
computer.
computer.
Before working inside your
Removing and installing components 45