Dell P117F003 Service Manual page 66

Table 4. System setup options—System information menu (continued)
Overview
Processor ID
Processor L2 Cache
Processor L3 Cache
Microcode Version
Intel Hyper-Threading Capable
64-Bit Technology
MEMORY
Memory Installed
Memory Available
Memory Speed
Memory Channel Mode
Memory Technology
DIMM A Size
DIMM B Size
DEVICES
Panel Type
Video Controller
Video Memory
Wi-Fi Device
Native Resolution
Video BIOS Version
Audio Controller
Bluetooth Device
LOM MAC Address
Table 5. System setup options—Boot Configuration menu
Boot Configuration
Boot Sequence
Boot Mode: UEFI only
Boot Sequence
Secure Boot
Enable Secure Boot
Secure Boot Mode
66 System setup
Displays the processor identification code.
Displays the processor L2 Cache size.
Displays the processor L3 Cache size.
Displays the microcode version.
Displays whether the processor is Hyper-Threading (HT) capable.
Displays whether 64-bit technology is used.
Displays the total computer memory installed.
Displays the total computer memory available.
Displays the memory speed.
Displays single or dual channel mode.
Displays the technology that is used for the memory.
Displays the memory configuration of DIMM A.
Displays the memory configuration of DIMM B.
Displays the Panel Type of the computer.
Displays the integrate graphics information of the computer.
Displays the video memory information of the computer.
Displays the Wi-Fi device installed in the computer.
Displays the native resolution of the computer.
Displays the video BIOS version of the computer.
Displays the audio controller information of the computer.
Displays whether a Bluetooth device is installed in the computer.
Displays the MAC address of the LAN on Motherboard (LOM)
Displays the boot mode of this computer.
Specifies the order that the BIOS searches the list of devices to find an
operating system to boot.
By default, ONBOARD NIC (IPV4) is selected
By default, ONBOARD NIC (IPV6) is selected
By default, UEFI Hard Drive is selected
Enables secure boot using only validated boot software.
Default: OFF
Modifies the behavior of Secure Boot to allow evaluation or enforcement of
UEFI driver signatures. Deployed Mode should be selected for normal operation
of Secure Boot.
By default, Deployed Mode is selected.