Wand Use - Sigma Metalytics Precious Metal Verifier INVESTOR 3012 Manual

Wands are optional attachments for the PMV INVESTOR. To use
a Wand attachment, plug the Wand into the Wand Connector on
the right-hand side of the device. When you plug in the Wand,
the device will self calibrate. Ensure the head of the Wand is
at least one inch away from any metal during this calibration
process. When the READY screen is displayed, you may touch
the face of the Wand to a sample.
When measuring with the Wand, only the Basic Verification
Mode reading will display. There will also be a yellow Wand
indicator on the screen indicating the device is using the Wand's
sensor. Wands are not able to perform density testing.

Wand Use

Basic Verification Result
Wand Icon
When the Wand is touched to metal, the screen
Wand Reading Screen
will change to show the results of the reading.
There is only one bar and a yellow icon appears
to indicate that the wand is in use.
20