Speaker plugs................. 2 Servicing ................2 Product service centres ............2 FCC Notice* ................3 WELCOME TO THE WORLD OF CYRUS ........4 Preparations for Installation ..........4 Adjustable feet ..............4 INSTALLATION ................5 Key to the rear panel drawing .......... 5 IMPORTANT –...
Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. Classic POWER User Instructions...
• When the product exhibits a distinct change in performance. The Classic POWER is supplied with a pair of dual speaker REPLACEMENT PARTS: When replacement parts are plugs. To ensure safe operation of this amplifier, the speaker...
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. *115V products Classic POWER User Instructions...
• 1 x Firmware update cable and respected manufacturers of hi-fi equipment. • 2 x Phono leads for MC-BUS connection Now is a good time to register your new Cyrus product. • Quick-start guide To register, click here or visit - After removing these items, please retain the packaging.
NOTE: When connecting a streamer (such as the Cyrus Classic STREAM) to a Classic POWER, ensure that the output The Classic POWER is supplied with a pair of dual speaker is set to variable. plugs. To ensure safe operation of this amplifier, the speaker...
Once the cable is available, connect it between the 12V Note: to set up bi-amplification, the loudspeakers must have Trigger input on the back of the Classic POWER and a 12V bi-wirable terminals to enable seperate connection the bass trigger output on the Home Cinema receiver or other and treble units.
NOTE: Connection of a PSX-R is detected automatically, so no internal adjustments are required. How it works When a PSX-R is connected to a Cyrus product, the power feeds to the internal circuitry are split two ways with the clean, stable power source of the PSX-R feeding sensitive circuit sections while other requirements are supplied internally.
When switched on the standby indicator will be green, when in standby the indicator will be red. Selecting an input Unbalanced (RCA) or balanced (XLR) inputs can be selected using the toggle switch on the rear of the Classic POWER. Classic POWER User Instructions...
Error indicators Your amplifier has a unique fault indication system to help If your Classic POWER is not operating properly, disconnect you to diagnose problems. Fault condition messages will be the power and check all connections using the notes in this displayed via the Standby indicator in the event of a system handbook.
S/N Ratio (unwtd) .............>100dB WEEE Cyrus reserves the right to change all specifications without notice. E &OE This logo means that this product is not to be disposed of with your household waste. This product should be handed over to a designated collection point to be recycled.
Page 14
Cyrus Audio Ltd., Ermine Business Park, Huntingdon, PE29 6XY, U.K. v1.0...
Need help?
Do you have a question about the CLASSIC POWER and is the answer not in the manual?
Questions and answers