Download Print this page

PowerTec UT1008 Owner's Manual page 6

Planer stand

Advertisement

STAND ASSEMBLY
ITEM DESCRIPTION
G
Legs
H
Short Upper Flanges Rails
I
Long Upper Flanges Rails
J
Tie Bars
Q
5/16"-18 x 5/8" Carriage Bolts
R
5/16" Lock Washers
S
5/16"-18 Nuts
4
1.
See Figure 5. Place the assembled frame base in the
upright position.
2.
Position and attach the Legs (G) to the corners using four
5/16"-18 x 5/8" Carriage Bolts (Q), 5/16" Lock Washers (R)
and 5/16"-18 Nuts (S). Tighten the hardware.
Figure 5
3.
See Figure 6. Attach the Short upper anges rails (H) to the
inside of the legs (G) using eight 5/16"-18 x 5/8" Carriage
Bolts (Q), 5/16" Lock Washers (R) and 5/16"-18 Nuts (S).
Tighten the hardware. Be sure the holes in the sides are
aligned with the locating divots provided.
Figure 6
4.
Attach the Long Upper anges Rails ( I ) to the inside of the
legs (G), overlapping the short sides, using eight 5/16"-18 x
5/8" Carriage Bolts (Q), 5/16" Lock Washers (R) and 5/16"-
18 Nuts (S). Tighten the hardware. Be sure the holes in the
sides are aligned with the locating divots provided.
5.
Attach the Tie Bars (J) to the inside middle of the Legs (G)
using four 5/16"-18 x 5/8" Carriage Bolts (Q), 5/16" Lock
Washers (R) and 5/16"-18 Nuts (S). Tighten the hardware.
Items Needed
LOWER SHELF ASSEMBLY
QTY
ITEM DESCRIPTION
4
K
Shelf
2
Q
5/16"-18 x 5/8" Carriage Bolts
R
2
5/16" Lock Washers
S
2
5/16"-18 Nuts
24
1.
See Figure 7. Position Shelf (K), lip down, aligning holes
with those on the Tie Bars (J).
24
2.
Insert four 5/16"-18 x 5/8" Carriage Bolts (Q) through the
24
holes in the shelf and the tie brackets.
3.
Secure the shelf with Lock Washers (R) and 5/16"-18 Nuts (S).
Tighten the hardware.
Figure 7
TOP ASSEMBLY
ITEM DESCRIPTION
L
Mdf Top (Covered In Melamine)
M
5/16"-18 x 1-1/2" Flat Head Screws
R
5/16" Lock Washers
S
5/16"-18 Nuts
See Figure 8. Attach the MDF top (L) to the Long upper anges
rails ( I ) using four 5/16"-18 x 1-1/2" Flat Head Screws (M),
four each of 5/16" Lock Washers (R) and 5/16"-18 Nuts (S).
Tighten the hardware.
Figure 8
Items Needed
Items Needed
QTY
1
4
4
4
QTY
1
4
4
4

Advertisement

loading