Page 1
Model No. UT1002 Owner’s Manual UNIVERSAL STAND QUESTION... Visit us on the web at www.southerntechllc.com You will need this manual for safety instructions, operating procedures, and warranty. Put it and the original sales invoice in a safe, dry place for future reference.
PRODUCT SPECIFICATIONS SECTION PAGE SAFETY RULES Model No. UT1002 Top (with wood top) A 25" x 14" (635 x 356 mm) Leg Spacing B 32" x 22-3/4" (813 x 578 mm) ASSEMBLY Height (with wood top) C 32-1/8" (816 mm) Shelf 27"...
SAFETY RULES WARNING tools. may be loose. climb on the universal stand; it could tip over, causing serious injury. being attached to the stand. universal stand is 500 lbs (227 kg). WARNING universal stand to tip over. For your own safety, read all of the rules and precautions before operating tool.
ASSEMBLY ASSEMBLY UNPACKING Refer to Figure 3 - 5 Refer to Figure 2 WARNING Your new universal stand is shipped complete in one carton. universal stand for scaffolding or as a ladder. Make sure to tighten all screws securely prior to use.
Page 5
NOTE: Contact the customer service center if any of these parts are missing. the screw, now assemble the foot, flat washer and nut, NOTE: After unit is assembled dispose of all packaging Figure 3, inset. material in an environmentally safe way. NOTE: Adjust the foot by moving the nut on the screw APPLICATIONS place the adjustable foot on any leg.
MAINTENANCE GENERAL MAINTENANCE WARNING WARNING grease. Always use a clean cloth when cleaning. Never When servicing, use only identical replacement parts. Use use brake fluids, gasoline, petroleum based products of any other parts may create a hazard or cause product or any strong solvent to clean the universal stand .
LIMITED ONE YEAR WARRANTY This warranty covers all defects in workmanship or materials in this POWERTEC tool for a one year period from the date of purchase. This warranty is specific to this tool. Southern Technologies, LLC reserves the right to repair or replace the defective tool, at its discretion.