Self-Diagnosis; Humidity Range - Fujitsu ARTA24LATU Operating Manual

Table of Contents

Advertisement

OPERATING TIPS
Notice
*l During use of the heating mode, the outdoor unit will
occasionally commence the defrost operation for brief
periods. During the defrosting operation, if the user sets
the indoor unit for heating again, the defrosting mode
will continue, and the heating operation will begin after
completion of defrosting, with the result that some time
may be required before warm air is emitted.

SELF-DIAGNOSIS

When "EE" in Temperature Display is displayed, inspection of the air conditioning system is necessary. Please consult
authorized service personnel.
TEMPERATURE AND HUMIDITY RANGE
Permissible ranges of temperature and humidity are as follows:
Model
Cooling / Dry
Operation
Heating
If the unit is used under higher temperature conditions than those noted here, the automatic protection circuit may operate,
interrupting the operation.
If the unit is used under lower temperature conditions than those noted here, the heat exchanger may freeze, causing water
leakage or other malfunction.
l Do not use the air conditioner for any purpose other than room cooling/dry, room heating, or fan.
Unit number (usually 0)
SU MO TU WE TH FR SA
ex. Self-diagnosis check
Outdoor temperature
Indoor temperature
Indoor humidity
Outdoor temperature
Indoor temperature
*l During use of the heating mode, the top of the indoor
unit may become warm, but this is due to the fact that
coolant is circulated through the indoor unit even when
it is stopped; it is not a malfunction.
Error code
AR18, AR24
About –10°C to 46°C
About 18°C to 32°C
Below approximately 80%.
If the air conditioner is used continuously for many hours,
water may condense on the surface and drip.
About –15°C to 24°C
About below 30°C
AR30, AR36, AR45
About –15°C to 46°C
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Arta30lbtuArta36latuArta45latu

Table of Contents