OMTPLC01.book Page 15 Thursday, September 15, 2005 10:19 AM
Playing Audio CDs
Audio CDs will play upon insertion. All standard Audio CD navigation features are available.
The On-Screen Display
The Audio CD OSD displays the current track, mute status, repeat mode, and playback time.
Controlling Playback
Press
once to stop the disc at the current location, and twice to stop the disc completely.
When the disc is playing, press
Press
to return to the previous track.
Press
to skip to the next track.
Press
to fast reverse the audio. Press
through the speed options: ×2, ×4, ×8, ×20, and normal speed.
Press
to return to normal play mode or to start playing the disc again when it is stopped or
paused.
To skip directly to a track, enter the track number on the keypad.
Searching to a Location
You can search to a track or time on the current disc using the SEARCH button.
To search to a location:
1. Press SEARCH to bring up the Search menu.
2. Use
and
3. Enter the desired location.
4. Press
.
Repeating Tracks
Press REPEAT to cycle through the repeat modes: Off, Track, All, and A–B. You can repeat an
arbitrary section of audio using the A–B repeat mode.
To repeat an arbitrary selection:
1. Press REPEAT until "REPEAT A–" shows to mark the beginning of the section.
2. Press REPEAT once more to mark the end of the section. "REPEAT A–B" will display on the
screen.
The section will begin repeating and will continue until you press REPEAT again.
CD
TRK 2/18
to pause it.
to fast forward the audio. Repeated presses cycle
to select track or time.
00 : 00 : 31
15