Replacing The Remote Battery - PROTRON TPL-C01 User Manual

OMTPLC01.book Page 10 Thursday, September 15, 2005 10:19 AM
Using the Remote Control

Replacing the Remote Battery

The remote requires a 3V lithium battery (CR2025), which is held in a small
enclosure at the bottom of the remote.
To replace the battery:
1. Turn the remote over.
2. Release the battery enclosure and pull it out of the remote.
3. Remove the old battery and replace it with the new battery. The
positive (+) terminal should face up.
4. Slide the enclosure back into the remote.
CAUTION:
Danger of explosion if battery is replaced incorrectly. Replace only with
same or equivalent type.
+
10