Turning Your Instrument On And Off - oticon Epoq BTE 13 Instructions For Use Manual

To replace the battery, follow these instructions:
• Open the battery door completely by pushing the raised edge on the bottom of
the instrument. To assist with the handling of the batteries, the magnet placed
at the end of the MultiTool can be used.
• Remove the sticky label from the + side of the new battery.
• The new battery may be inserted by using the magnetic end of the MultiTool.
Ensure that the positive (+) marking faces the positive (+) sign printed on the
battery door. Close the battery door.
If any moisture on the battery surface, it should be
wiped off before use. When you change the battery,
it will take a few seconds before the battery works
to full capacity.
MultiTool
8

Turning your instrument ON and OFF

Turn ON your hearing instrument by closing the battery door completely with the battery
in place. When the battery door is closed the instrument will start up by playing a jingle.
This indicates that the battery is working and the instrument is operating.
Turn OFF your hearing instrument by opening the battery door slightly until a "click" is felt.
To preserve the battery, make sure your hearing instrument is switched off when
you are not wearing it.
IMPORTANT NOTICE
Open the battery compartment
fully to allow air to circu late
whenever you are not using your
hearing instrument, especially
at night!
ON OFF
Click Click
9