Power-On Utilities - Gainscha GI-2408T Series User Manual

5.2 Power-on Utilities

This printer has six power-on functions for setting or testing the printer's hardware. Press these
buttons at the same time when the power is turned on, and release the buttons with the light signal
to activate these functions.
Follow these steps to enable the boot function:
Event
Self-test A. Power off the printer
B. Make sure the printer is loaded with paper and close the printer cover
C. Press and hold the FEED button and turn on the printer. When you hear
a beep, release the FEED button. At this time, the printer will print a self-
test page.
Enter USB A. Power off the printer
storage B. Make sure the printer is loaded with paper and close the printer cover
device C. Press and hold the PAUSE button and turn on the printer. When you
function hear a beep, release the PAUSE button, and the printer's storage device
will appear on the computer.
Enter dump A. Power off the printer
mode B. Make sure the printer is loaded with paper and close the printer cover
C. Press and hold the PAUSE and FEED buttons at the same time for two
seconds, then turn on the printer's power. When the online Blue and the
error Red are on at the same time, release PAUSE and FEED buttons,
when you hear a beep, the printer enters the dump mode and will print out
"NOW IN DUMP MODE"
Skip A. Power off the printer
AUTO.BAS B. Press and hold PAUSE and FEED buttons for four seconds at the same
time, and turn on the printer power until the power Blue is off, and the error
Red is on, release PAUSE and FEED buttons, two beeps are heard. At
this time, the printer will skip the AUTO.BAS program, and then the power
light is on
Printer A. Power off the printer
initialization B.Press and hold PAUSE and FEED buttons at the same time for six
seconds, and turn on the printer power until the printer online Blue is on
and error Red is off, release PAUSE and FEED buttons, five beeps are
heard. At this time the printer will restore the printer parameters to the
factory default settings
Ribbon The machine will automatically detect the status of the ribbon after turning
inspection on and in each thermal transfer printing mode.
Description
36
Status lights Beep