NOTE:
Ensure that you fold the keyboard data cable in perfect alignment.
3. Install the:
a.
battery
b.
base cover
c.
SD card
4. Follow the procedure in
Primary memory module
Removing the primary memory module
1. Follow the procedure in
2. Remove the:
a.
SD card
b.
base cover
c.
battery
d.
keyboard
3. To remove primary memory module:
a. Remove the single (M2.0x3.0) screw that secures the memory shield [1].
b. Slide and lift the memory shield from the memory module on the system [2].
c. Pry the retention clips away from the memory module until it pops up [3].
d. Lift the memory module and remove it from the system [4].
NOTE:
Repeat step (c) and (d) if there is another memory installed.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
29