Power Management - Dell P74F002 Service Manual

Table 9. Performance (continued)
Option
Intel TurboBoost
Hyper-Thread Control

Power management

Table 10. Power Management
Option
AC Behavior
Enable Intel Speed Shift
Technology
Auto On Time
USB Wake Support
Wireless Radio Control
Wake on LAN
108 BIOS setup
Description
Allows you to enable or disable the computer from turning on automatically when an AC adapter
is connected.
● Wake on AC
This option is not set by default.
Allows you to enable or disable the Intel Speed Shift Technology.
● Enabled—Default
Allows you to set the time at which the computer must turn on automatically.
The options are:
● Disabled—Default
● Every Day
● Weekdays
● Select Days
This option is not set by default.
Allows you to enable USB devices to wake the system from standby.
● Enable USB Wake Support
This option is not set by default.
This option if enabled, will sense the connection of the system to a wired network and
subsequently disable the selected wireless radios (WLAN and/or WWAN). Upon disconnection
from the wired network the selected wireless radio will ne enabled.
● Control WLAN radio
● Control WWAN radio
This option is not set by default.
This option allows the computer to power up from the off state when triggered by a special LAN
signal. Wake-up from the Standby state is unaffected by this setting and must be enabled in the
operating system. This feature only works when the computer is connected to AC power supply.
● Disabled—Default - Does not allow the system to power on by special LAN signals when it
receives a wake-up signal from the LAN or wireless LAN.
● LAN Only - Allows the system to be powered on by special LAN signals.
Description
This option is set by default.
Allows you to enable or disable the Intel TurboBoost mode of
the processor.
● Enable Intel TurboBoost
This option is set by default.
Allows you to enable or disable the HyperThreading in the
processor.
● Disabled
● Enabled—Default