Table of Contents
Advertisement
Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Phillips screwdriver #1
● Torx #5 (T5) screwdriver
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Base cover
Battery
Battery
Right fan
I/O board shield
Left fan
Solid-state drive 1
Solid-state drive 2
8
Removing and installing components
Secured to
Screw type
Palm-rest and
M2x3
keyboard assembly
Palm-rest and
M2x3
keyboard assembly
Palm-rest and
M2x4
keyboard assembly
System board and
M2x4
palm-rest and
keyboard assembly
I/O board
M2x4
System board and
M2x4
palm-rest and
keyboard assembly
System board
M2x2
System board
M2x2
Quantity
Screw image
8
4
4
1
1
2
1
1
2
Advertisement
Table of Contents
