Temperature Regulation - Whirlpool ADN 203B Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Available languages

THE APPLIANCE BASIC PARTS (see page 1. fig. 1)

On/ off switch for interior light

I -(ON) O –(OFF)

Thermostat knob

Thermostat indicator

Electricity supply indicator

When the appliance is connected to

the electricity supply, the green

indicator light is illuminated.

Interior light block (LED)

Fan. WARNING! The fan switches on and continuously operates!

The temperature in the device compartment is controlled using the thermostat knob 2 (see

fig. 1) by turning it to one side or the other. The temperature indication in digits is shown

beside the thermostat knob. When the door is closed, the temperature setting can be seen

on the thermostat indicator display 3 (see fig. 1, page 1). The numbers "0, 1, 2, 3, 4, 5"

do not mean a specific temperatures.

The temperature is regulated on the scale of five digits.

0 = Compressor is switched off WARNING! Electric current is not switched off.

1 = highest temperature (lowest cooling)

5 = lowest temperature (highest cooling)

THE TEMPERATURE IN THE DEVICE COMPARTMENT MAY VARY DEPENDING ON

AMBIENT TEMPERATURE, THE AMOUNT OF FOODSTUFFS, THE TEMPERATURE OF

THE FOODSTUFFS, AND HOW OFTEN THE APPLIANCE DOORS ARE OPENED AND

CLOSED.

If the room is cool, the appliance cools less. The temperature in the appliance may

therefore rise. Use the thermostat wheel to set a lower temperature.

THE REFRIGERATOR COMPARTMENT DEFROSTS AUTOMATICALLY. Drops of ice that form on

the back wall of the refrigerator compartment thaw during the time the compressor is not

working and the thaw water runs down the thaw water runoff channel to the tray on top of the

compressor, where it evaporates.

REGULARLY CLEAN THE APPLIANCE.

Remember that before cleaning the back part of the appliance body you must

disconnect the appliance from the electrical energy supply socket by pulling

the plug out of the electricity outlet.