E-Lock - Lenovo 30DH00H8IX User Manual

8. Install a new power supply assembly.
9. Connect the power supply assembly cables to the system board.
10. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.

E-lock

Prerequisite
Before you start, read Appendix B "Important safety information" on page 109 and print the following
instructions.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 46.
2. Disconnect the E-lock cable from the system board.
.
Chapter 8 CRU replacement
101