Table of Contents
Advertisement
Safety
This machine has been designed in accordance
with EN ISO 5395 (when you complete the setup
procedures) and ANSI B71.4-2017.
General Safety
This product is capable of amputating hands and feet
and of throwing objects.
•
Read and understand the contents of this
Operator's Manual before starting the engine.
•
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.
•
Do not put your hands or feet near moving
components of the machine.
•
Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.
Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. To engage the parking
brake, secure the brake
pedals with the locking pin,
press the parking-brake
pedals and engage the toe
pedal.
117-4763
2. To disengage the parking
brake, disengage the
locking pin and release the
pedals.
•
Keep bystanders and children out of the operating
area. Never allow children to operate the machine.
•
Shut off the engine, remove the key (if equipped),
and wait for all movement to stop before you leave
the operator's position. Allow the machine to cool
before adjusting, servicing, cleaning, or storing it.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol
means Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
Engine-Emission
Certification
The engine in this machine is EU Stage 3b compliant.
decal117-4763
1. Hydraulic fluid
4
, which
93-6680
93-6686
2. Read the Operator's
Manual.
decal93-6680
decal93-6686
Advertisement
Chapters
Table of Contents
