Melec ADB-5K40 Instruction Manual page 9

●When inputting power:
●When inputting the motor excitation stop (M.F) signal:
●When the overheat alarm (O.H.A) LED comes on:
●When performing maintenance and checking:
CAUTION
Breakage of the machine or injury is
apprehended due to unexpected behavior of
the motor. Maintain the state where
emergency stop is enabled at any time.
CAUTION
Deterioration of the holding power with
the motor may cause breakage of the machine
or injury.
Check safety before inputting.
WARNING
Overheating may cause fire.
Stop operation when this LED comes on.
WARNING
Injury or fire is apprehended due to
unexpected behavior.
Do not replace fuse.
Do not disassemble, repair or modify.
-9-
ADB-5K40
Instructions Manual