Table of Contents
Advertisement
2.8
Connectors
2.8.1
Rear panel connectors
1.
RJ-45 port for iKVM: This RJ-45 port functions only when you install ASMB9
management card.
2.
Video Graphics Adapter port: This port is for a VGA monitor or other VGA-compatible
devices.
3.
RJ-45 ports for LAN: These ports allows Gigabit connection to a LAN (Local Area
Network) through a network hub. Refer to the table below for the LAN port LED
indications.
4.
Q-Code LED: The Q-Code LED provides a 2-digit display that shows the status of your
system. Refer to the Q-Code table of this user guide for more information about the
2-digit codes.
5.
Power-on Button: Press this button to turn on the system.
6.
USB 3.1 Gen 2 ports 1 and 2: These 4-pin USB (Universal Serial Bus) ports are
available for connecting USB 3.1 Gen 2 devices.
7.
USB 3.1 Gen 1 ports 5 and 6: These 4-pin USB (Universal Serial Bus) ports are
available for connecting USB 3.1 Gen 1 devices.
LAN port LED indications
Activity/Link LED
Status
Description
OFF
No link
GREEN
Linked
BLINKING
Data activity
Dedicated Management LAN port (DM_LAN1) LED indications
Activity/Link LED
Status
Description
OFF
No link
YELLOW
Linked
BLINKING
Data activity
P11C-E/4L
Speed LED
Status
Description
OFF
10 Mbps connection
YELLOW
100 Mbps connection
GREEN
1 Gbps connection
Speed LED
Status
Description
OFF
10 Mbps connection
ORANGE
100 Mbps connection
GREEN
1 Gbps connection
ACT/LINK
SPEED
LED
LED
LAN port
ACT/LINK
SPEED
LED
LED
DM LAN port
2-27
Advertisement
Table of Contents
