Table of Contents
Advertisement
5.1.4
Intel
To enter the Intel
1.
Turn on the system.
Go to the Advanced menu > PCH Storage Configuration > SATA Mode
2.
Selection, then set the item to [Intel RST Premium With Intel Optane System
Acceleration(RAID)].
3.
Go to the Boot menu > CSM (Compatibility Support Module) > Launch CSM, then
set the item to [Enabled]. Make sure that Boot from Storage Devices is also set to
[Legacy only].
4.
Save your changes and exit the BIOS Setup. During POST, press <Ctrl> + <I> to
display the utility main menu.
RAID Volumes:
None defined.
Physical Devices:
Port
0
1
2
3
The navigation keys at the bottom of the screen allow you to move through the menus
and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and may not
exactly match the items on your screen.
•
•
5-4
Rapid Storage Technology Option ROM utility
®
Rapid Storage Technology Option ROM utility:
®
Device Model
Serial #
ST3160812AS
9LS0HJA4
ST3160812AS
9LS0F4HL
ST3160812AS
3LS0JYL8
ST3160812AS
9LS0BJ5H
The Intel
Rapid Storage Technology Option ROM utility supports SATA devices only.
®
The utility supports maximum four hard disk drives for RAID configuration.
Size
Type/Status(Vol ID)
149.0GB
Non-RAID Disk
149.0GB
Non-RAID Disk
149.0GB
Non-RAID Disk
149.0GB
Non-RAID Disk
Chapter 5: RAID Configuration
Advertisement
Table of Contents
