Caring for Your Dryer
■
Ventilation Grill and Cool Air
Inlet Grill
Vacuum the front ventilation grill 3-4 times a
year to make sure there is no build up of lint
or dirt that may cause improper air flow.
NOTE
- Warm air is exhausted through the
ventilation grill.
- Adequate ventilation should be
provided to avoid the back flow of
gases into the room from units
burning other fuels, such as open
fires.
■
Condensed Water Drain-out
Normally, condensed water is pumped up to
the water container where water is collected
until manually emptied. Water can also be
drained out directly to a mains drain,
especially when the dryer is stacked on top
of a washing machine.
With a connecting kit for the mains drain
hose, simply change the water path and
re-route to the drainage facility as below:
1. Take
connecting
kit out.
2. Separate
water
container
hose from
the kit.
20
3. Connect
drain hose
to the kit.
■
Moisture Sensor
The device senses the moisture level of the
laundry during operation, which means it
must be cleaned regularly to remove any
build-up of lime scale on the surface of the
sensor.
Wipe the sensors inside drum.
(as illustrated)