Installation Instructions - Allen + Roth RIGSBY RGWM2230 Manual

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Installation Time: 30 minutes
Tools Required for Installation (not included): Pencil, Level, Screwdriver, Hammer.

INSTALLATION INSTRUCTIONS

Step 1: Preparing the Wall
1a. Place the mirror (A) against the wall and
determine your desired hanging location.
Using a pencil, mark two locations on the
wall that match up with the mirror's (A)
pre-attached mounting hooks.
1b.
Ensure the marks are horizontally straight
by using a level.
NOTE: It is best to find a stud in your wall to
ensure the mirror hangs securely.
1
3